Study and Model Formulation for Curved Surface Using Computational Fluid Dynamics (CFD)

R.E. Shelke¹* and L.B. Bhuyar²

¹Government I.T.I. Morshi Road, Amravati - 444 603 (India).

²Department of Mechanical Engineering PRM Institute of Technology and Research, Badnera Amravati - 444 701 (India).

ABSTRACT:

Impinging jets on curved surfaces are important in many industrial applications. Experimentation have been carried out for heat transfer evaluation between the impinging air jets and curved surfaces in the prior research. An attempt has been made towards the model development using Computational Fluid Dynamics (CFD) to validate the experimental results obtained for curved surface in the present study. This attempt is made because, the physical model experimentation is time consuming and cumbersome as well as costlier affair. Hence, if the CFD model is developed in accordance with the results obtained earlier and if it is in good agreement with the same then using the same procedure, the CFD models for flat and rough surface can also be formulated, thereby, reducing the efforts of actual experimentations in future.

KEYWORDS: Impinging air jet; Heat transfer; Computational Fluid Dynamics (CFD)

Copy the following to cite this article: Shelke R. E, Bhuyar L. B. Study and Model Formulation for Curved Surface Using Computational Fluid Dynamics (CFD). Orient. J. Comp. Sci. and Technol;2(1)

Copy the following to cite this URL: Shelke R. E, Bhuyar L. B. Study and Model Formulation for Curved Surface Using Computational Fluid Dynamics (CFD). Orient. J. Comp. Sci. and Technol;2(1). Available from: http://www.computerscijournal.org/?p=2110

---

This work is licensed under a Creative Commons Attribution 4.0 International License.